SOLUTION

MENUS

Test Equipment Precautions

Test equipment use method

Selection scheme

Download information

400-068-3818

Office telephone: 027-82818935

Company fax: 027-87747006

Email: zecers@163.com

Website: www.zecers.com

Company address: No.62 Guanggu Avenue, Donghu High-tech Development Zone, Wuhan City

2024

Precautions for three-phase capacitance inductance tester

Classification:

Test Equipment Precautions

Home page

ZRG-500S three-phase capacitance inductance tester note:

1. Do not touch the metal part of the test line during the measurement to avoid being electrically injured.

2. The measurement wiring must be strictly operated according to the instructions, otherwise the consequences will be at your own risk.

3. Before testing, be sure to carefully check whether the set parameters are correct.

4. It is best to use a power socket with a ground wire.

5. When connecting the capacitor test, the short-circuit effect must be good, otherwise it will affect the test results.

6. The test wiring must be carried out under the condition that the tested line is grounded to prevent induced voltage from electric shock. All short circuits, earthing and leads shall be of adequate cross-section and shall be securely connected. The test organization should be strict and the communication should be smooth to ensure the safe and smooth progress of the test work.

7. When the instrument needs to be charged, turn off the working power supply (press "O" to turn off), plug in the power cord, and the yellow light of the charging indicator starts to flash, indicating that the charging has entered a normal state.

Six sequential electric protection tester matters needing attention

None